The Power Addition Characteristics of Slow Walking Silk

2023-03-27

surface quality (1) Nanosecond level high peak current pulse power supply technology The erosion of metals during electrical discharge machining can be divided into two types: melting and gasification. The wide pulse width action time is long, which is easy to cause melting processing, resulting in poor surface morphology of the workpiece, thickening of the metamorphic layer, increasing internal stress, and easy to generate cracks. When the pulse width is small to a certain value, the action

MORE +

Working principle of slow wire walking

2023-03-27

Slow walking wire is a kind of machining machine tool that uses continuously moving thin metal wires (called electrode wires) as electrodes to perform pulse spark discharge to remove metal from the workpiece and cut it into shape.

MORE +

Technical requirements for shrapnel

2023-03-27

1. The radius of the curved part. When forming spring sheets, most of them need to be bent. If the radius of curvature of curved parts is relatively small, these parts will generate significant stress. Therefore, in order to avoid large stresses in the curved part, the bending radius should be designed to be at least five times the thickness of the plate.

MORE +