Common problems and solutions of sheet metal stamping

2023-03-27

The sheet metal stamping process is a cold forming manufacturing process in which a mold is used on a press to press on the shape of a metal blank, thereby forming plastic deformation. This process can also be accompanied by other forming tools to obtain a complete part or as an intermediate step.

MORE +

Common problems and solutions for sheet metal bending

2023-03-27

Sheet metal bending is an important sheet metal process because it requires no tools to draw various part geometries, and has fast delivery times, high repeatability, and a high degree of automation. It also allows products to be fabricated from a single piece of metal, using plastic deformation rather than welding or riveting to connect multiple components together, thereby reducing costs, improving strength, and simplifying assembly.

MORE +

Common welding problems and solutions

2023-03-27

Welding is commonly used to connect two or more pieces of metal together. Whether it is MIG welding (gas shielded welding), TIG welding (tungsten gas shielded welding), shielded metal arc welding (SMAW), or flux cored flux welding (FCAW), if appropriate techniques are not used, some problems may be encountered.

MORE +

Common machining problems and solutions

2023-03-27

When the mold is large and deep, soft machining is used for rough and semi finish machining before quenching, and hard machining is used for finish machining after quenching; Small, shallow molds can be milled once after quenching. If the mold wall is very thin and the mold cavity is deep, electrical machining is used.

MORE +